URBAN ENERGY POLYTHERMAL INSULATION SPRAY

Benefits & Uses

A FEW OF MANY APPLICATIONS

Insulate any type of wall/domestic/commercial/agricultural
Insulate any type of roof/domestic/commercial/agricultural
Insulate any type of floor/domestic/commercial/agricultural
Insulate virtually any service.

A FEW OF MANY BENEFITS & FEATURES

Fully Approved: Technical approvals for construction. Carries a BBA Approval Inspection Testing Certification. Agrement Certificate No 11/4816. BASF POLYURETHANES WALLTITE.

Agrement Certification Includes as follows

Factors relating to compliance with all building regulations where applicable
Factors relating to additional non-regulatory information where applicable
Independently verified technical investigations
Design considerations
Insulation guidance
Regular surveillance of production
Formal three-yearly reviews

Key factors Assessed
Practicability of installation: The product should only be installed by contractors trained and approved the certificate holder. Thermal performance: When installed at the appropriate thickness, the product can enable roofs to meet or improve on U values for existing building regulations.

Condensation risk: The product has a water vapour resistivity approximately 306 MN.s.g-1.m-2, but the risk of interstitial condensation will depend on the roof construction and should be assessed for each project. Adhesion: The product bonds sufficiently to slate and clay tiles Weather tightness: The product will contribute towards the roof covering resisting the passage of water, wind-blown snow and dust into the interior of the building.

Behaviour in relation to fire: The product has a class 1 surface spread of flame rating and may be used in suitable roof constructions. Durability: The durability of the product is satisfactory and should remain effective for at least 20 years. Full BBA Certificate produced on request.

Continued benefits and features...

Normally applied in one-two days
Very low thermal conductivity not achieved by conventional materials
With stands wind damage well in access of 100 miles an hour
No dust and grit caused by chafing slates and tiles (cleaner air)
Saves pounds on heating bills, up to 80% reduction in heat loss
Helps to eliminate condensation
Protects expensive items for atmospheric changes that cause damage
Improves efficiency of PV inverters in the loft space
Creates a warm roof at the top of the building allowing loft floors to be boarded
Insulates cold floors in cellars
Insulates walls
Helps with sound proofing especially in flight paths
No gaps that cause draughts/loft conversions
No harmful odours and gasses
Sets in minutes
No freezing pipes in the area of the loft or insulated area
Closed cell to stop insects making nests
Perfect for loft conversions because no gaps under plaster boarding
Closed cell with a vapour barrier but air tight to reduce condensation which contributes to mould and mildew
Increase strength in wall lining systems and no settling and sagging in wall cavity situations
Extremely light weight and very strong in rigidity
Controls indoor air quality
No inhalable fibres are emitted (Fibreglass)

Enquires for a free survey contact
Urban Energy UK LTD
3 Deans Farm Buildings
Phillips Lane, Salisbury Wilts
SP1 3YP
Freephone 0800 232 1624

Downloads